This refurbished Indian Wars era Saddle is made of high quality American leather. The stirrup hangers are steel. The saddle features period correct Indian Wars iron and brass hardware and shield. Coat straps and English Indigo Blue Wool Girth not included.

Available in Black only. Saddle Blanket sold separately.

Click on the picture for more images.

Proudly MADE IN USA.

Stamped brass "US" cavalry bridle rosette. Sold in PAIRS.

Click on the picture for more images.

Proudly Made in USA.

Stamped brass Texas star cavalry bridle rosette. The rosette is 1 1/2" in diameter.  Sold in PAIRS.

Click on the picture for more images.

Proudly Made in USA.

Stamped brass "USA" artillery bridle rosette. The rosette is 2" in diameter. Sold in PAIRS.

Click on the picture for more images.

Back by Popular Demand. Limited Stock.

Proudly Made in USA.

1859 style US Cavalry bit. Medium port for tongue relief.

Made from black sweet iron. 5 1/4” mouth.

Click on the picture for more images.

CS Cavalry bit made of steel. The bit has a straight bar mouthpiece and a 5 1/4” mouth.  Shanks measure approximately 8 3/4" long. There are pre-drilled holes for adding a curb chain.

Click on the picture for more images.

These 6 Foot long Cavalry Reins are 5/8 inch wide and feature buckle ends to easily attach to the the bit rings. They are made of high quality American leather. Available in Black or Russet leather.

Click on the picture for more images.

Proudly MADE in USA.

These 6 Foot long Cavalry Reins are 7/8 inch wide and feature buckle ends to easily attach to the the bit rings. They are made of high quality American leather. Available in Black or Russet leather.

Click on the picture for more images.

Proudly MADE in USA.

This Running Martingale is made from high quality American leather. It consists of a strap which is attached to the breast collar and divides into two pieces. At the end of each of these straps is a small metal ring through which the reins pass. Available in Black or Russet leather.

Click on the picture for more images.

Proudly MADE in USA.

The Cavalry Halter is made of high quality American leather with black iron hardware. The halter leather measures 1 1/4 inches wide. Available in Black or Russet leather.

Click on the picture for more images. 

Proudly MADE in USA.

The Cavalry Lead Strap is made of high quality American leather. It measures approximately 7/8 inches x 76 inches. The lead strap is available in Black or Russet leather.

Click on the picture for more images.

Proudly MADE in USA.

The Cavalry Link Strap is made of high quality American Leather with black buckle and snap. It is available in Black or Russet leather.

Click on the picture for more images.

Proudly Made in USA.

This Martingale (or Breast Collar) features the large stamped brass heart. Made of high quality American leather, it is of the finest workmanship. It is available in Black or Russet leather. Price includes the Plain Brass heart. NEW! Change to the Federal Eagle Brass heart for $15.00 more.

Click on the picture for more images.

Proudly MADE in USA.

Stamped brass plain martingale heart.

Click on the picture for more images.

Proudly Made in USA.

Large stamped brass Federal Eagle martingale heart. Size is 3 3/4 H X 3 1/2 W.

Click on the picture for more images. 

Proudly Made in USA.

Large stamped Brass Heart with Nickel Federal Eagle martingale heart. Size is 3 3/4 H X 3 1/2 W.

Click on the picture for more images. 

Proudly Made in USA.

The Cavalry Crupper is made of high quality American leather. Adjustable for correct length using two straps with buckles that attach to the saddle cantle rings. Available in black leather. Russet leather is available by special order.

Click on the picture for more images.

Proudly MADE in USA.

This period correct 1859 McClellan Saddle Girth is made of blue webbing and high quality American leather. It measures approximately 3 1/2 inches x 21 inches. It features a black roller buckle and D-ring.

*Measurements are subject to material availability from our vendor at the time of production.

Available in black leather. Russet leather is available by special order.

Click on the picture for more images.

Proudly MADE in USA.

This Cavalry Surcingle is made of high quality American leather. It features approximately 3 1/2 inches wide English Indigo Blue wool webbing. The overall length is about 84 inches and should fit most modern day horses. The webbing length is 52 inches and the strap length is 30 inches.

*measurements are subject to material availability from our vendor at the time of production*

Available in black leather. Russet leather is available as a special order.

Click on the picture for more images.

Proudly MADE in USA.

This replica Officer Saddle Blanket measures approximately 40 inches x 24 inches. Made from quilted wool with a quilted cotton lining. This saddle blanket is to be used under the saddle. It has a swallow tail design. 

Customizable to suit your needs. Please call for additional information.

Available in your choice of wool color, branch of service trim color, and officer rank. 

Limited stock available for Union Cavalry only. Please allow 4-6 weeks for delivery.

Click on the picture for more images.

Imported.

US Saddle Blanket six point star of gold embroidery on a black background. Sold in pairs. Approximately 2 1/4" in diameter.

Click on the picture for a larger image.

Imported.

These Civil War Saddle Bags are made of high quality American leather. Great attention to detail has been made to ensure the most accurate authentic reproduction. The saddle bag measures approximately 9 inches wide x 10 inches high x 3 3/4 inches deep. The overall length from end to end is approximately 36 inches. These high quality saddle bags are available in Black or Russet leather.

Click on the picture to see larger and additional detail images.

Proudly MADE in USA.

The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.

Click on the picture for more images.

Proudly Made in USA.

The wooden Military Stirrup is covered with high quality American leather. The stirrup tread is 4 1/4 inches and the neck is 1 1/2 inches to fit the McClellan stirrup leathers. Sold as a pair.

Available in Black or Russet leather.

Click on the picture for additional images.

Proudly Made in USA. Please allow 2 weeks for delivery.

The Cavalry Stirrup Strap is made of high quality American harness leather with a period correct black iron buckle. The buckle is sewn and riveted on for strength and durability. The stirrup strap measures 60 inches long x 1 1/4 inches wide. Straps are sold individually. Available in Black or Russet leather.

Click on the picture for more images.

Proudly MADE in USA. Please allow 2 weeks for delivery.

The cavalry Fender is made of high quality American leather and are sold individually. Available in Black leather. Russet leather is available by special order.

Click on the picture for a larger image.

Proudly MADE in USA.

Please allow 2 weeks for delivery.

The 1858 McClellan Saddle Skirt is made of high quality American leather and are sold as a pair. Available in black leather. Russet leather is available by special order.

Click on the picture for a larger image.

Proudly MADE in USA.

The Poncho is made of Waterproof and Fire Resistant Black Cloth treated with an silicone rubber coating. The Poncho DOES NOT FEEL LIKE RUBBER. The Poncho FEELS LIKE STIFF FABRIC. The neck hole is faced so there are no exposed raw fabric edges. There is a grommet at each corner of the Poncho, 2 grommets along the front bottom hem, 2 grommets along the back bottom hem, and 4 grommets along each side for a total of 16 grommets. The Poncho is approximately 4 feet x 6 feet in size.

Click on the picture for more images.

Proudly MADE IN USA.

The Poncho is a complete, ready to use Civil War raincoat. Made with rubber coated canvas, reinforced neck hole. Authentic replica of original.

Click on the picture for a larger image.

Imported.

This heavy weight, 3.75 pound Wool Blanket is 66 inches x 84 inches. This soft wool blend blanket is not scratchy.

Wool is a natural fiber that breathes in hot weather and insulates in cold. The wool yarn from two directions are actually woven together producing a very durable, warm and long lasting wool blanket. Naturally flame retardant.

Machine wash & dry: Machine wash on a gentle cycle, add fabric softener to the final rinse and tumble-dry on low heat. 

Imported.

Click on the picture to see additional, larger pictures.

Click here to read how to Make and Pack a Blanket Roll.

This heavy weight, 3.75 pound Wool Blanket is 66 inches x 84 inches. This soft wool blend blanket is not scratchy.

Wool is a natural fiber that breathes in hot weather and insulates in cold. The wool yarn from two directions are actually woven together producing a very durable, warm and long lasting wool blanket. Naturally flame retardant.

Machine wash & dry: Machine wash on a gentle cycle, add fabric softener to the final rinse and tumble-dry on low heat. Imported.

Click on the picture to see additional, larger pictures.

Click here to read how to Make and Pack a Blanket Roll.

OUT OF STOCK.

This heavy weight, 3.75 pound wool blend blanket is 66" x 84". This soft wool blanket is not scratchy.

Wool is a natural fiber that breathes in hot weather and insulates in cold. The wool yarn from two directions are actually woven together producing a very durable, warm and long lasting wool blanket. Naturally flame retardant.

Machine wash & dry: Machine wash on a gentle cycle, add fabric softener to the final rinse and tumble-dry on low heat. 

Click on the picture to see additional, larger pictures.

Click here to read how to Make and Pack a Blanket Roll.

This is a blanket roll strap, bed roll strap and a coat strap, depending upon your usage. The strap measures approximately 5/8" x 24 3/4". Available in black leather only.

Click on the picture for a larger image.

Imported.

The Gum Blanket is made of Waterproof and Fire Resistant Black Cloth treated with an silicone rubber coating. The Gum Blanket DOES NOT FEEL LIKE RUBBER. The Gum Blanket FEELS LIKE STIFF FABRIC. There is a grommet at each corner of the Gum Blanket. The Gum Blanket is approximately 4 feet x 6 feet in size. Since this is a blanket there is no neck hole. The Gum Blanket goes under your bedroll and insulates you from the cold and damp of the ground.

Click on the picture for more images.

Proudly MADE IN USA.

The Gum Blanket is made of rubber coated canvas with edge grommets. Since this is a blanket there is no neck hole. The gum blanket goes under your bedroll and insulates you from the cold and damp of the ground.

Approximately 4 feet x 6 feet in size.

Click on the picture for a larger image.

Imported.

This is a quality Feed Bag made of canvas and American leather. It features a leather bottom and an adjustable leather strap. Height 11 inches, diameter 8 inches. Available in Black leather. 

Click on the picture for more images.

Proudly MADE in USA.

This heavy canvas, lined, collapsible water bucket is 12" deep and 8" in diameter. It has a heavy-duty rope handle. This bucket is an excellent addition to any camp.

Click on the picture for a larger image.

Imported.

Leather Canteen Strap with snap hook for attaching the canteen to the saddle. Canteen NOT included.

Click on the picture for more images.

Proudly Made in USA.

This Indian War Canteen with US Stamped brown canvas cover is made of Stainless Steel with a pewter spout. The adjustable leather canteen strap is approximately 84 inches long. The cover is Hand-Stitched on the canteen. Complete with cork & chain.

Click on the picture for more images.

Imported.

This bugle is correct for the Civil War period. It is used by both CS and US forces. The bugle is made of brass. It is about 11" long.

Click on the picture for a larger image.

Imported.

This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.

This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.

The 2-Piece Buckle or Spoon & Wreath Buckle is NOT included but available for an additional charge. If the Buckle is purchased with the belt, we will install the buckle at no extra charge.

The belt comes in two different widths:

Click on the picture for additional images.

Proudly MADE in USA.

The J.E.B. Stuart Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time, so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.

The hanger is available in black or brown.

Snap Swivels are available at an extra charge. 2 snap swivels are needed.

Click on the picture for additional images.

Imported.

This hanger is typically used for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.

Snap Swivels are available at an extra charge. 2 snap swivels are needed.

Click on the picture for additional images.

Imported.

Brass. Used for Saber and Sword Belt Hangers. Replica of Original.

Sold individually.

Click on picture for a larger image.

Imported.

Solid brass, double headed stud used on saber/sword belts and knapsacks.  Each saber/sword belt used four studs to attach the top and bottom sword hangers. These are replacement studs as our saber belts come completed.

Sold individually.

Click on picture for more images.

Proudly MADE in USA.

The M1860 Light Cavalry Saber is a fine reproduction saber and a faithful copy of the originals used. It is made to to perform exactly as the original in every way. The hand forged blade is British military spec fully tempered 1065 high carbon steel that will flex over 20 degrees and return to true. The leather handle is wire wrapped and the pommel and guard is brass. This saber is collector grade. The blade is unsharpened.

The Inspectors Mark on the blade reads "US, ADK, 1862". The other side of the blade is marked "AMES MFG CO, CHICOPEE, MASS"

This saber features a 35" long, curved blade superbly designed for thrusting and slashing. Comes complete with a stout steel scabbard. Overall length is 41".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions and other items ordered.

Imported.

The M1860 Cavalry Officer Saber is a fine reproduction saber and a faithful copy of the originals used. It is made to to perform exactly as the original in every way. The hand forged blade is British military spec fully tempered 1065 high carbon steel. The leather handle is wire wrapped and the pommel and guard is brass. The blade is unsharpened. This saber is collector grade.

The brass, 3-branch guard is nicely hand chased and engraved, as is the brass pommel. Blade is beautifully etched with “U.S.,” and “E Pluribus Unum,” along with foliage and military trophies. Steel scabbard has brass throat, rings and drag.

The blade is 33" long, 1 1/8" wide, and 3/16" thick. It weighs 2 pounds 3 oz. Overall length is 39". Scabbard weight is 1 pound 10 oz.

Click here to learn how to care for your Edged Weapon. Saber knot now available in Silver.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions.

Imported.

This authentic, hand made replica is hand forged and fully tempered of British military spec 1095 high carbon steel. Made with original handle and sheath materials to ensure it performs exactly as the original did. Features a flexible, ornate blade and leather grip wrapped with brass wire. It is just like the old one carried by General Jo Shelby, the Missouri cavalry raider who never surrendered his command. This fine sword has "C.S.A." crisply acid etched on the hand forged blade. "C.S." is cast into the guard with excellent detail. The scabbard is blued steel, with brass throats, mounts, rings and drag. Beautifully finished. The blade is unsharpened. This saber is collector grade.

This saber features a 32" long, curved blade. Comes complete with a stout steel scabbard. Overall length is 38".

This saber is documented on page 122 in Confederate Edged Weapons by William A. Albaugh III.

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box.

Imported

The 1840 non commissioned sword was carried by American soldiers for over 70 years; a period which included the Mexican War, Civil War and Spanish American War.

This 1840 Non Commissioned Sword is a fine reproduction sword, is a faithful copy of the originals used and is collector grade. The single edged blade has a single broad fuller running from the ricasso to near the point. The entire hilt is cast brass and the grip is ribbed. Pommel is global with a capstan. Grip is flanked by kidney-shaped hand guards. NCO sword comes with a steel scabbard. The blade is unsharpened and the scabbard is made for a NCO style belt.  Will not attach to a standard saber belt.

The blade is 31 3/4 inches long.

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions.

Imported.

The M1850 Union Staff & Field Officer Sword is a fine reproduction sword and a faithful copy of the originals used. It is made to to perform exactly as the original in every way.  The leather handle is wire wrapped and the pommel and guard are brass. The blade is unsharpened. This sword is collector grade.

Befitting their rank, this sword displays a high degree of ornamentation. The brass guard has hand chased foliage and "U.S." between the branches. The blade is etched with foliage, military trophies, "U.S.", "E Pluribus Unum" and "Iron Proof." During the years before the war, many Confederate officers, including General Robert E. Lee, carried this sword in the Indian campaigns. Brass pommel, scabbard is blue steel.

The blade is 30" long, overall length is 35".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions.

Imported.

The Confederate Staff & Field Officer Sword is a fine reproduction sword and a faithful copy of the originals used. It is made to to perform exactly as the original in every way.  The leather handle is wire wrapped and the pommel and guard are brass. The blade is unsharpened.

This faithful reproduction of the Boyle, Gamble and McFee sword is a beauty and is collector grade. The blade etching is even more detailed than on the old ones, with the heroic "C.S.A.", cannon and battle flag all well done. The brass fittings are beautifully hand finished with precise detail. Note the five pointed star and "CS" on the knuckle bow. Top grain leather scabbard.

Refer to Confederate Edged Weapons by William A. Albaugh, III page 9.

The blade is 31" long, overall length is 36".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box.

Imported.

Of all the Confederate swords and sabers this one was the one used most. Wielded by the troops under the command of J.E.B. Stuart, Wade Hampton, and Nathan Bedford Forrest, this saber dispatched horsed of Yankee soldiers. This is a very distinctive saber with a brass guard similar to that of the 1860 Light Cavalry Saber.

This saber is a fine reproduction and a faithful copy of the originals used. The hand forged blade is British military spec fully tempered 1095 high carbon steel. The brown leather grip is wrapped with brass wire and the pommel and guard are brass. The blade has the classic Confederate "unstopped" fuller. The scabbard has brass furniture, ring mounts, and drag. The blade is unsharpened. This saber is collector grade.

This saber features a 34" long, curved blade. Comes complete with a stout steel scabbard. Overall length is 40".

This saber is documented on page 137 in Confederate Edged Weapons by William A. Albaugh III.

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box and other items ordered.

Imported

Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.

Click on the picture for more images.

Imported.

Gold woven braid with large gold acorn on one end. One fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel. Now available in Silver.

Click on the picture for more images.

Imported.

Our Cavalry / Artillery Boots feature a two piece front and square toe construction, leather welts with stitched soles and leather pull loops at the boot tops. Standard heels are the flat military heel of approximately 1 inch high. Leather used is standard weight boot leather. Black leather only.

Click on the picture for more images.

Order your normal shoe size. IF you have a difficult to fit foot, please call for assistance.

Click here to learn how to care for your Leather Footwear.

Allow up to 6 weeks for delivery for large sizes over 14 or sizes out of stock.

Imported.

Our Civil War Boots feature a one piece front with a knee flap and square toe construction, leather welts with stitched soles and leather pull loops at the boot tops. Standard heels are the flat military heel of approximately 1 inch high. Leather used is standard weight boot leather. Black leather only.

Click on the picture for more images.

Order your normal shoe size. IF you have a difficult to fit foot, please call for assistance.

Click here to learn how to care for your Leather Footwear.

 OVERSTOCK SALE Save $10.00 over regular price! - SIZES: 10, 10.5, 11.5, 13 Only - Limited to supplies on hand.

Imported.

The M1859 US regulation spurs were the standard spurs issued to enlisted cavalry and horse artillery during the Civil War and Early Indian Wars. These spurs were also used extensively by the Confederate mounted troops.

The spurs are made of cast brass with steel rowels. The Type 1 have the FLAT heel strap. The shank comes off the top of the strap and goes almost straight back to the rowel.

Sold in pairs.

Click on picture to see more images.

Imported.

Officers "Winged Eagle" cavalry spurs are made of cast brass with steel rowels. This was a very popular pattern of spurs. These spurs were used from 1855 thru the 1890's. Appropriate for both US and CS officers. Sold in pairs. Spur straps are available for an additional cost.

Click on picture to see more images.

Imported.

Officer's Horse Head cavalry spurs are made of cast brass with steel rowels. These spurs were used from 1855 thru the late 1800's. Appropriate for both US and CS officers. Sold in pairs. Spur straps are available at an additional cost.

Click on picture to see more images.

Imported.

Nickel-plated spurs were in use during the Plains Indian War, or as a private purchase during the late Civil War.

Available in Officer's Horse Head or Officer's Eagle. The Cavalry spurs are made of cast brass with Chrome plating and steel rowels. These spurs were used from 1855 thru the late 1800's. Appropriate for both US and CS officers, and officers during the Plains Indian War.

Great for Officer, Western, or Civilian persona. 

Sold in pairs. Spur straps are available at an additional cost.

Click on picture to see more images.

Imported.

The M1833 US Spurs were the standard issue spurs for Dragoon and horse artillery during the Mexican War.  They were also used in the Civil war by enlisted soldiers and officers. 

The spurs are made of cast brass with steel rowels. The shank comes off of the top of the strap and extends straight back to the rowel.

Sold in pairs.

Click on picture to see more images.

Imported.

The M1872 US regulation spurs were the standard spurs issued to enlisted cavalry and horse artillery during the Indian War . These spurs were similar to the Model 1859 and Model 1885

The spurs are made of cast brass with steel rowels. The Type 1 have the FLAT heel strap. The shank comes off the top of the strap and goes almost straight back to the rowel.

Sold in pairs.

Click on picture to see more images.

Imported.

The cavalry spur strap measures 5/8" x 18 3/4". Sold individually. Available in black leather only.

Click on the picture for more images.

Imported.

The 1863 Cavalry Sharps Carbine does not have a patch box. The frame is case hardened and the round 22" barrel is blued.  The .54 caliber carbine is 39" overall.

Click on the picture to enlarge the image.

Made by Chiappa firearms of Italy.

Firearms and cylinders cannot be returned or exchanged.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER.

The 1858 Revolving Carbine was one of the first muzzle-loading revolving carbine. This model was known for its easy handling and reliability. About 3,000 models were produced from 1866 - 1879. 

This .44 caliber carbine features a walnut stock and an adjustable sight. It has a tapered 18" steel barrel and brass trigger guard.

Click on the picture to enlarge image.

Made by Uberti.

Firearms and cylinders cannot be returned or exchanged.

Adult (over 21) Signature is Required for delivery.

Low Stock. Please contact us to confirm stock before ordering.

The 1859 Cavalry Sharps Carbine has a patch box. The frame is case hardened and the round 22" barrel is blued.  The .54 caliber carbine is 39" overall.

Click on the picture to enlarge the image.

Made by Chiappa firearms of Italy.

Firearms and cylinders cannot be returned or exchanged.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER.

Made with high quality American leather, this Carbine Sling is authentically reproduced, may carry an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.  Arsenal stamps were randomly used on a many products during the 1860s, but not all.

The carbine was carried by the trooper, suspended from the Carbine Sling which worn across his body and attached to the carbine by the snap swivel.

Click on the picture for more images.

Proudly MADE in USA.

The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.

Click on the picture for more images.

Available in Black only.

Imported.

The carbine swivel snap is used by cavalry troopers to keep the carbine handy while mounted. The snap swivel goes on the carbine sling. Should a trooper drop his carbine, the carbine remains attached and available due to the carbine sling and carbine swivel snap. This swivel is used with any Civil War or Indian War carbines.

Click on the picture for more images.

Imported.

Specially priced brass hardware for the Cavalry Carbine Sling. Regulation buckle and brass end piece to fit a width of 2-3/8". The end piece needs to have holes drilled for rivet attachment to the leather carbine sling.

The carbine was carried by the trooper, suspended from the Carbine Sling which was worn across his body and attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.

Click on the picture for more images.

Imported.

This Carbine Socket is made of high quality American leather. The Carbine Socket was designed to hold the barrel of a trooper's carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather only.

Click on the picture for more images.

Proudly MADE in USA.

Issued with each cavalry saddle, the Carbine Socket buckled to the “offside” or right “D” ring of the saddle’s quarter straps. The carbine was carried by the trooper suspended from the sling worn across his body attached to the carbine by the snap swivel. When the trooper was mounted, the barrel of his carbine was fed into the socket attached to his saddle and so arranged, kept the muzzle of his carbine under control, and prevented it from slapping against the side of the horse.

The Carbine Boot was designed to hold the barrel of a trooper's carbine snugly while riding on his mount.

This first pattern M1885 carbine boot is made of High Quality American leather. Available in Black leather only.

Click on the picture for more images.

Proudly MADE in USA.

An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.

Available Options: Black or Russet.

Click on the picture for additional images.

Imported.

The Civil War Blakeslee Spencer Quick Loader Cartridge Box is designed for the Spencer Carbine. Because of the rapid speed that a Spencer carbine could be fired, a special box needed to be designed to hold cartridges for loading. Erasmus Blakeslee patented this box late in 1864. U.S. Government contracts for over 30,000 boxes were delivered to the War Department but few were used in the Civil War due to time delays of production and distribution.

This box contains 6 tin tubes encased in a bored wood block. The wood block is wrapped in smooth black bridle leather with a hinged leather lid to protect the open tops of the tin tubes from the elements. The box is worn over the shoulder on the left side. The leather shoulder strap attached to the box holds the device close to the trooper's left side. This arrangement allows the soldier to reach across with his right hand, flip open the 'Quickloader' box lid, draw out a single magazine tube filled with seven cartridges and insert the bullets into the stock of the Spencer weapon. The box has an implement pouch just like the originals, include the shoulder sling, and has a belt loop on the back.

Available for EITHER .44-40 ammunition OR .56-50 ammunition.  The .44-40 will fit .45 Long Colt ammunition. 

The box is available in black leather only and measures approximately 13 inches longs and 2 inches by 3 inches wide.

Click on the picture for additional images.

Imported.

The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in Black or Russet leather. Color selection will be available on the Shopping Cart page.

Chief of Ordnance, General Alexander Dyer, designed the cartridge box needed to carry the ammunition needed by the single action Colt revolvers issued during the late 1800's. The .45 cal cartridges could be easily carried and accessed with this new design.

Click on the picture for additional images.

Imported

The M1876 McKeever Box is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass finial. There are two belt loops on the back. Inside are 2 rows of ten canvas loops for 20 cartridges. The box opens by folding down on a brass hinge. The box is available in Black or Russet leather.

Click on the picture for additional images.

Imported

This economical pistol cylinder box is of the correct pattern. Two wooden dowels hold cylinders for most black powder pistols. It has 2 loops on the back for attaching to the belt. It features a brass finial and is sewn in white thread.

Click on the image for more pictures.

Imported.

This economical pistol cartridge box is of the correct pattern. It has 2 loops on the back for attaching to the belt. It features a brass finial and is sewn in white thread.

The box is available in Black or Russet.

Click on the picture for additional images.

Imported.

This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.

Select US regulation black or CS Shield in black or russet. 
Now stamped with Ordnance Inspectors stamp on the front of US Cap Box at no additional charge. 

Click on the picture for more images.

Imported.

Studio Overstock!

This economical cap box features a brass finial, 2 belt loops on the back and is sewn in white thread. This cap box is stamped "CS" and is available in Black only.

These cap boxes are considered to be a rare item. Photograph of an Original below for reference only.

Click on the picture for more images.

Imported.

This American made Pistol Holster is made of high quality American leather. It fits most .36 - .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - Left Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture to see additional images.

Proudly Made in USA.

This economical and authentically made Pistol Holster fits most .36 - .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture for more images.

Imported.

This economical and authentically made Pistol Holster fits most .36 - .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a CLOSED bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture for more images.

Imported.

This American made Colt Walker Revolver Pistol Holster is made of high quality American leather. It is designed to fit the Colt Walker Revolver. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture to see additional images.

Proudly Made in USA.
If not in stock, please allow 4 weeks for delivery.

This American made Dragoon Revolver Pistol Holster is made of high quality American leather. It is designed to fit the Dragoon Revolver. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture to see additional images.

Proudly Made in USA.

If not in stock, please allow 4 weeks for delivery.

The Old Red Lantern is a 15 LED, 100 lumen lantern that brings classic charm and warm, inviting light to any space. It's safe for use in tents and barns. Blending rustic design with modern technology, the Old Red features a realistic flickering flame and a control to adjust the amount of light that is generated.

No smoke and no fire...the adjustable light output allows Old Red to operate for hours on end with 4 AA batteries, which are included. On HIGH (100 Lumens) Old Red operates for about 9 hours. On LOW, Old Red operates for about 80 hours. The Old Red Lantern is 9 inches high x 4.5 inches wide and is lightweight at about 0.9 pounds.

The Old red Lantern features metal construction with a wire-guarded glass globe. It can sit on a table or hang from the wire hook.

Click on the picture for more images.

Designed in USA.

Watch the film:

This 15 LED Lantern is the perfect blend between classic design and modern technology. The lantern is lit by 15 high-power LEDs producing an output of 25 lumens. This 9 inch high metal lantern has a wire-guard to protect the glass globe. No kerosene, no lamp oil and no citronella…this 15 LED is completely battery operated, powered by 2 D batteries (batteries not included.) To maintain the functionality of a traditional kerosene lantern, this 15 LED Lantern has a control to adjust the amount of light that is generated. A reflector is positioned above the LEDs to cast the light evenly in every direction. Perfect for indoor or outdoor use, this lantern generates over 96 hours of continuous bright light. The 15 LED Lantern, the traditional lantern look with efficient LED lighting!

The 15 LED Lantern is (H) 9 inches High x 4.5 inches Wide and weighs about 0.9 pounds.

Click on the picture for more images.

Imported.

The US Mounted Services Greatcoat is worn by Cavalry and Mounted Artillery. The Coat is a Double Breasted 12 Button Front Coat with a 12 Button Cape that extends to the cuff. The coat uses Federal Eagle Buttons and the button holes are HAND STITCHED. The Coat features a Stand and Fall Collar and Fold Down Cuffs.

The coat is made of 16 oz. Sky Blue or Navy Blue Wool with a heavy cotton body lining that extends just below the waist. The coat skirt has a split back seam and the belted back features 2 large buttons. The hem is left raw (unhemmed) as per originals. Navy blue is for officer.  Most sizes will need to be ordered.  Let us know if you want it made with a certain button for Officer.

For a roomier fit over sack coats and shell jackets, order 1-2 sizes larger than your normal size.

Click on the picture for more images.

Imported. Limited sizes in are In Stock. Call 208-398-7279 for specifics. Please allow 4-6 weeks for delivery for other sizes. Navy blue color has to be ordered.

The CS Mounted Greatcoat is a Double Breasted 12 Button Front Coat with a 12 Button Cape that extends to the cuff. The Coat uses CSA Buttons and the button holes are HAND STITCHED. The Coat features a Stand Up Collar and is WITHOUT the Fold Down Cuffs found on Union Greatcoats.

The coat is made of 16 oz. Medium Grey Wool with a heavy cotton body lining that extends just below the waist. The coat skirt has a split back seam and the belted back features 2 large buttons. The hem is left raw (unhemmed) as per originals. The Cape can be lined with Wool in the color denoting Branch of Service.

For a roomier fit over sack coats and shell jackets order 1-2 sizes larger than your normal size.

Click on the picture for more images.

Imported. Limited sizes In Stock. Call 208-398-7279 for details. Please allow 4-6 weeks for delivery for other sizes.

Our Civil War gauntlets are authentically styled and are made of high quality Kidskin. They have wide cuffs without embroidery. They are available in natural buff or white.

Made of natural buff leather, these officer's gauntlet are embroidered in gold with the Branch of Army insignia designating infantry.

Made of natural buff leather, these officer's gauntlet are embroidered in gold with the Branch of Army insignia designating Artillery.

Made of high quality leather, these officer's gauntlet are embroidered in gold with the Branch of Army insignia designating Cavalry. Select natural buff or white leather.

Made of natural buff leather, these officer's gauntlet are embroidered in gold with the Branch of Army insignia eagle designating staff. 

The bandana is made of quality 100% cotton and measures about 22 inches square. Double sided printing. It is available in Red or Navy Blue.

Click on the picture for a larger image.

Imported or Made in USA.

*** CLOSEOUT *** Brass Bugle with approximately 1/2 inch SMALL dent. The dent is small and doesn't affect the function of the bugle. Please see the pictures for EXAMPLE of dent. This bugle is correct for the Civil War period. It is used by both CS and US forces. The bugle is made of brass. It is about 11" long.

Only 1 available . Sold AS IS. All Sales Final.

Click on the picture for more images.

Imported.

This heavy weight, 3.75 pound Wool Blanket is 62 inches x 80 inches. This soft wool blend blanket is not scratchy.

Wool is a natural fiber that breathes in hot weather and insulates in cold. The wool yarn from two directions are actually woven together producing a very durable, warm and long lasting wool blanket. Naturally flame retardant.

 COLOR CHOICES: RED/BLACK PLAID OR TAN/BROWN PLAID

Machine wash & dry: Machine wash on a gentle cycle, add fabric softener to the final rinse and tumble-dry on low heat. 

Click on the picture to see additional, larger pictures.

Click here to read how to Make and Pack a Blanket Roll.

Solid brass, hook used on saber/sword belts.  This hook will replacement your lost or damaged hook on just about every saber belt.

Sold individually.

Click on picture for more images.

Proudly MADE in USA.

The Pommel Shield is a fixture of American Saddles dating back to 1841. A decorative device that can be attached to the saddle pommel.

Available in intertwined USA and CS. Choose your shield in the box below.

Proudly Made in USA

The Indian War "Cavalry" Pistol Holster has a smaller flap than the Civil War model. This Pistol Holster is made of high quality American leather embossed with "US" on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.

Designed to fit the single action SA .45 long colt , 7" barrel pistol, this holster will also fit the black powder pistols.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture for more images.

Proudly Made in USA.