This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.

Select US regulation black or CS Shield in black or russet. 
Now stamped with Ordnance Inspectors stamp on the front of US Cap Box at no additional charge. 

Click on the picture for more images.

Imported.

This is the Indian Wars pistol cartridge pouch for the M1873.  Nearly identical to the American Civil War Cap Box, except with US in oval embossed on the flap.  This economical cap box features an interior lining, brass finial, 2 belt loops on the back and is sewn in white thread.

Started life as a Civil War pattern pouch, was probably unissued, and was then recycled for use during the Indian Wars era. They originally had a wood block to hold the cartridges, but most troopers took them out so the cartridge box would hold a few more cartridges.

Click on the picture for more images.

Imported.

Studio Overstock!

This economical cap box features a brass finial, 2 belt loops on the back and is sewn in white thread. This cap box is stamped "CS" and is available in Black only.

These cap boxes are considered to be a rare item. Photograph of an Original below for reference only.

Click on the picture for more images.

Imported.

This economical .58 caliber cartridge box can be used by US or CS. It is a replica of the 1855 .58 caliber pattern and includes tins. It has a brass finial and both belt loops and box sling attachments, per the original, on the back. It is sewn in white thread.
Now stamped with Ordnance Inspectors stamp on the front at no additional charge.

Click on the picture for more images.

Imported.

This economical .58 caliber cartridge box can be used by US or CS. It is a replica of the 1855 .58 caliber pattern and includes tins. It has a brass finial and both belt loops and box sling attachments, per the original, on the back. It is sewn in white thread. 
Now stamped with Ordnance Inspectors stamp on the front at no additional charge.

Click on the picture for more images.

Imported.

This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included.  Per the original the box has cartridge box sling loops on the back. It cannot be worn on a belt.

Click on the inage for more pictures.

Available in black only.

Imported.

This economical pistol cylinder box is of the correct pattern. Two wooden dowels hold cylinders for most black powder pistols. It has 2 loops on the back for attaching to the belt. It features a brass finial and is sewn in white thread.

Click on the image for more pictures.

Imported.

This economical pistol cartridge box is of the correct pattern. It has 2 loops on the back for attaching to the belt. It features a brass finial and is sewn in white thread.

The box is available in Black or Russet.

Click on the picture for additional images.

Imported.

An economical cavalry carbine cartridge box features an inner flap covering a tool pouch. Wooden blocks for cartridges are included. The tab on the front flap is both sewn and riveted. There are 2 belt loops on the back. The box is sewn in white thread and is made of black leather and now in Russet.

Available Options: Black or Russet.

Click on the picture for additional images.

Imported.

The Leather Cartridge Box Sling is approximately 72 inches in length. Available in Black or Russet leather.

Click on the picture for a larger image.

Imported.

Longer Leather Cartridge Box Sling is approximately 82 inches in length. This is 12 inches longer then the standard 72 inch.  Available in Black leather.

Click on the picture for a larger image.

Imported.

This Leather Cartridge Box Sling is made of high quality American leather. It is approximately 72" in length. Available in BLACK leather.

Click on the picture for more images.

Proudly MADE IN USA.

The Canvas Cartridge Box Sling is used by the Confederate soldier. This Canvas Sling has a decorative stitching pattern and russet leather ends as per the originals. It measures approximately 72 inches long and is about 2 inches wide.

Click on the picture for more images.

Imported.

The Canvas Cartridge Box Sling is used by the Confederate soldier. This Canvas Sling has a decorative stitching pattern and black leather ends as per the originals. It measures approximately 72 inches long and is about 2 inches wide.

Click on the picture for more images.

Imported.

The Tarred Canvas Cartridge Box Sling is used by the Confederate soldier.   The South’s primary source of painted waterproof cloth was in Columbus, Georgia and this sling almost certainly was made by one of the various manufacturers associated with the Columbus Depot.  Was also used for Rifleman cartridge boxes. It is approximately 72 inches in length

Click on the picture for more images.

Imported.

These are Authentic Federal Style Double Tins sold as a pair. They fit the .58 caliber cartridge box.

Click on the image for a larger picture.

Imported.

These paper cartridge tubes are reproductions of the originals and are re-enactment-safe living history cartridges. They contain NO powder and NO bullet. These tubes are NOT designed for live loads and are strictly for blank use ONLY. They about 1/2 inch in diameter and will hold about 75 grains of powder. Once you have filled these cartridges with the measured amount of powder, twist and fold the top to seal and place them in your cartridge box.

These are sold in bags of 100 tubes. Click on the picture for more images.

Proudly MADE IN USA in the great state of Idaho.

In Stock

PLEASE NOTE: TUBES MUST BE SHIPPED WITH CARE AND CAN ADD TO THE SHIPPING COST OF AN ORDER.  PLEASE CONTACT US IF YOU HAVE QUESTIONS.

Large - Telescope Case for 11" Deep by 2 1/2 Wide made of high quality American Leather. Available in Dark Brown or Black leather. Comes with an adjustable shoulder strap.

Proudly Made in USA.

Click on the picture for more images.

Under Arm Holster- USA Made....

Authentically made Pistol Holster fits most .36 - .44 caliber revolvers. The holster features a full adjustable leather straps. The holster is for under the left arm making it a right hand draw. The holster has a Open bottom. The holster has a tight fit so you can form the leather to fit your revolver perfect. 

Click on the picture for more images.

Select Black or russet leather.

Now Available.

Proudly Made in the USA.

This economical and authentically made Pistol Holster fits most .36 - .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a OPEN bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture for more images.

Imported.

This economical and authentically made Pistol Holster fits most .36 - .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a CLOSED bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture for more images.

Imported.

This American made Pistol Holster is made of high quality American leather. It fits most .36 - .44 caliber revolvers. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - Left Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture to see additional images.

Proudly Made in USA.

This American made Colt Walker Revolver Pistol Holster is made of high quality American leather. It is designed to fit the Colt Walker Revolver. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture to see additional images.

Proudly Made in USA.
If not in stock, please allow 4 weeks for delivery.

This American made Dragoon Revolver Pistol Holster is made of high quality American leather. It is designed to fit the Dragoon Revolver. The holster features full wrap around flap that is both stitched and riveted. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in Black or Russet leather.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture to see additional images.

Proudly Made in USA.

If not in stock, please allow 4 weeks for delivery.

The Indian War "Cavalry" Pistol Holster has a smaller flap than the Civil War model. This Pistol Holster is made of high quality American leather embossed with "US" on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.

Designed to fit the single action SA .45 long colt , 7" barrel pistol, this holster will also fit the black powder pistols.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.

Click on the picture for more images.

Proudly Made in USA.

The Indian War "Cavalry" Pistol Holster has a smaller flap than the Civil War model. This economical Pistol Holster is made of quality leather embossed with "US" on the holster body. The holster is sewn with white linen thread. The closed flap is secured with a brass finial. The belt loop is stitched and riveted. The holster has a closed bottom. Available in black leather only.

Designed to fit the single action SA .45 long colt , 7" barrel pistol, this holster will also fit the black powder pistols.

The holster is worn on the right side, with the gun butt forward: RIGHT Side, Butt Forward. Left handed models - LEFT Side, Butt Forward - are also available. Left side holsters were less common as they were not standard issue.  New!!  Right Side, Butt Forward in Russet.

Click on the picture for more images.

Imported

The Pommel Holster is made of high quality American Leather. It fits .36 or .44 Caliber Revolvers. Available in black leather. Russet leather is available as a special order.

Click on the picture for more images.

Proudly Made in USA.

Complete set of bayonet, scabbard, and frog for the 1853 3-band Enfield long rifle.

The bayonet is designed for the 1853 3-band Enfield long rifle. Attached to the rifle the bayonet gave close quarters weapons an extra long reach. Brass mounted leather scabbard included. Excellent replica of the originals with great attention to details. Overall length is 20 1/2", the blade length is 17".

May need minor fitting.

Click on the picture for a larger image.

Imported.

The bayonet is designed for the 1853 3-band Enfield long rifle. Attached to the rifle the bayonet gave close quarters weapons an extra long reach. Brass mounted leather scabbard included. Excellent replica of the originals with great attention to details. Overall length is 20 1/2", the blade length is 17".

May need minor fitting.

Click on the picture for a larger image.

Enfield frog is available at an additional charge.

Imported.

The bayonet is designed for the 1853 3-band Enfield long rifle. Attached to the rifle the bayonet gave close quarters weapons an extra long reach. Excellent replica of the originals with great attention to details. Overall length is 20 1/2", the blade length is 17".

May need minor fitting.

Click on the picture for a larger image.

Imported.

Brass mounted leather scabbard for 1853 3-Band Enfield Rifle bayonet. Excellent replica of the originals with great attention to details. The length is approximately 17".

Click on the picture for a larger image.

Imported.

Enfield frog for 1853 3-Band Enfield Rifle bayonet and scabbard that fits over your belt. Click on picture for larger image.

AVAILABLE IN BLACK ONLY

Imported.

Enfield frog for 1853 3-Band Enfield Rifle bayonet and scabbard with no belt buckle that fits over your belt. Click on picture for larger image.

AVAILABLE IN BLACK ONLY

Imported.

The bayonet is designed for the Springfield .58 caliber musket. Attached to the rifle the bayonet gave close quarters weapons an extra long reach. Brass mounted leather scabbard, with integrated frog, included. Excellent replica of the originals with great attention to details. The blade length is 17".

May need minor fitting.

Click on the picture for a larger image.

Imported.

The bayonet is designed for the Springfield .58 caliber musket. Attached to the rifle the bayonet gave close quarters weapons an extra long reach. Excellent replica of the originals with great attention to details. The blade length is 17".

May need minor fitting.

Click on the picture for a larger image.

Imported.

Brass mounted leather scabbard with integrated frog for .58 caliber Springfield Rifle bayonet. Excellent replica of the originals with great attention to details. The length is approximately 17".

Click on the picture for a larger image.

Imported.

Proudly Made In USA.

Leather musket sling available in russet. Select Enfield approximately 49 inches or Springfield approximately 39 inches for the correct length.

Click on the picture for a larger image.

Imported.

Leather musket sling available in black. Select Enfield approximately 49 inches or Springfield approximately 39 inches for the correct length.

Click on the picture for a larger image.

Imported.

This Musket Sling is made of high quality American leather and is stamped with a period correct makers stamp. Available in Russet Leather only. Select Enfield approximately 49 inches or Springfield approximately 39 inches for the correct length.

Click on the picture for more images.

Proudly Made in USA.

Linen musket sling. Select Enfield approximately 49 inches or Springfield approximately 39 inches for the correct length.

Clink on the picture for a larger image.

Imported.

The 1840 non commissioned sword was carried by American soldiers for over 70 years; a period which included the Mexican War, Civil War and Spanish American War.

This 1840 Non Commissioned Sword is a fine reproduction sword, is a faithful copy of the originals used and is collector grade. The single edged blade has a single broad fuller running from the ricasso to near the point. The entire hilt is cast brass and the grip is ribbed. Pommel is global with a capstan. Grip is flanked by kidney-shaped hand guards. NCO sword comes with a steel scabbard. The blade is unsharpened and the scabbard is made for a NCO style belt.  Will not attach to a standard saber belt.

The blade is 31 3/4 inches long.

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions.

Imported.

The M1850 Union Staff & Field Officer Sword is a fine reproduction sword and a faithful copy of the originals used. It is made to to perform exactly as the original in every way.  The leather handle is wire wrapped and the pommel and guard are brass. The blade is unsharpened. This sword is collector grade.

Befitting their rank, this sword displays a high degree of ornamentation. The brass guard has hand chased foliage and "U.S." between the branches. The blade is etched with foliage, military trophies, "U.S.", "E Pluribus Unum" and "Iron Proof." During the years before the war, many Confederate officers, including General Robert E. Lee, carried this sword in the Indian campaigns. Brass pommel, scabbard is blue steel.

The blade is 30" long, overall length is 35".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions.

Imported.

The Confederate Staff & Field Officer Sword is a fine reproduction sword and a faithful copy of the originals used. It is made to to perform exactly as the original in every way.  The leather handle is wire wrapped and the pommel and guard are brass. The blade is unsharpened.

This faithful reproduction of the Boyle, Gamble and McFee sword is a beauty and is collector grade. The blade etching is even more detailed than on the old ones, with the heroic "C.S.A.", cannon and battle flag all well done. The brass fittings are beautifully hand finished with precise detail. Note the five pointed star and "CS" on the knuckle bow. Top grain leather scabbard.

Refer to Confederate Edged Weapons by William A. Albaugh, III page 9.

The blade is 31" long, overall length is 36".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box.

Imported.

This authentic, hand made replica is hand forged and fully tempered of British military spec 1095 high carbon steel. Made with original handle and sheath materials to ensure it performs exactly as the original did. This sword was supplied to all Army foot officers with the rank Major and below from 1851 to 1865. The tempered high carbon steel blade is etched with the letters "US", a floral pattern, branches and scrolls. The solid brass guard and hilt also displays a floral design. Our replica comes with a blackened metal scabbard with correct brass mounts. Made by Windlass Steelcrafts. The scabbard is blued steel, with brass throats, mounts, rings and drag. Beautifully finished. The blade is unsharpened. This saber is collector grade.

This saber features a 31" long, blade. Comes complete with a stout steel scabbard. Overall length is 36 5/8".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box.

Imported

The M1860 Light Cavalry Saber is a fine reproduction saber and a faithful copy of the originals used. It is made to to perform exactly as the original in every way. The hand forged blade is British military spec fully tempered 1065 high carbon steel that will flex over 20 degrees and return to true. The leather handle is wire wrapped and the pommel and guard is brass. This saber is collector grade. The blade is unsharpened.

The Inspectors Mark on the blade reads "US, ADK, 1862". The other side of the blade is marked "AMES MFG CO, CHICOPEE, MASS"

This saber features a 35" long, curved blade superbly designed for thrusting and slashing. Comes complete with a stout steel scabbard. Overall length is 41".

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions and other items ordered.

Imported.

The M1860 Cavalry Officer Saber is a fine reproduction saber and a faithful copy of the originals used. It is made to to perform exactly as the original in every way. The hand forged blade is British military spec fully tempered 1065 high carbon steel. The leather handle is wire wrapped and the pommel and guard is brass. The blade is unsharpened. This saber is collector grade.

The brass, 3-branch guard is nicely hand chased and engraved, as is the brass pommel. Blade is beautifully etched with “U.S.,” and “E Pluribus Unum,” along with foliage and military trophies. Steel scabbard has brass throat, rings and drag.

The blade is 33" long, 1 1/8" wide, and 3/16" thick. It weighs 2 pounds 3 oz. Overall length is 39". Scabbard weight is 1 pound 10 oz.

Click here to learn how to care for your Edged Weapon. Saber knot now available in Silver.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to box dimensions.

Imported.

Of all the Confederate swords and sabers this one was the one used most. Wielded by the troops under the command of J.E.B. Stuart, Wade Hampton, and Nathan Bedford Forrest, this saber dispatched horsed of Yankee soldiers. This is a very distinctive saber with a brass guard similar to that of the 1860 Light Cavalry Saber.

This saber is a fine reproduction and a faithful copy of the originals used. The hand forged blade is British military spec fully tempered 1095 high carbon steel. The brown leather grip is wrapped with brass wire and the pommel and guard are brass. The blade has the classic Confederate "unstopped" fuller. The scabbard has brass furniture, ring mounts, and drag. The blade is unsharpened. This saber is collector grade.

This saber features a 34" long, curved blade. Comes complete with a stout steel scabbard. Overall length is 40".

This saber is documented on page 137 in Confederate Edged Weapons by William A. Albaugh III.

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box and other items ordered.

Imported

This authentic, hand made replica is hand forged and fully tempered of British military spec 1095 high carbon steel. Made with original handle and sheath materials to ensure it performs exactly as the original did. Features a flexible, ornate blade and leather grip wrapped with brass wire. It is just like the old one carried by General Jo Shelby, the Missouri cavalry raider who never surrendered his command. This fine sword has "C.S.A." crisply acid etched on the hand forged blade. "C.S." is cast into the guard with excellent detail. The scabbard is blued steel, with brass throats, mounts, rings and drag. Beautifully finished. The blade is unsharpened. This saber is collector grade.

This saber features a 32" long, curved blade. Comes complete with a stout steel scabbard. Overall length is 38".

This saber is documented on page 122 in Confederate Edged Weapons by William A. Albaugh III.

Click here to learn how to care for your Edged Weapon.

Click on the picture for more images.

NOTE: Additional shipping charges MAY be needed due to size of box.

Imported

Black leather strap with a braided leather tassel. One end fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel.

Click on the picture for more images.

Imported.

Gold woven braid with large gold acorn on one end. One fastens to the grip of the saber and the tasseled end slips over the wrist to prevent dropping the saber during combat. It measures 22 inches including the tassel. Now available in Silver.

Click on the picture for more images.

Imported.

This Saber or Sword Belt is made from high quality American leather and comes with the over the shoulder Sam Browne strap and all hangers. Snap swivels are NOT included and are available at an EXTRA CHARGE. 2 snap swivels are required.

This belt is made to fit any 2-Piece Buckle or Spoon & Wreath Buckle and NO STITCHING is required to affix the Buckle. Brass hook makes this belt adjustable for many sizes. The belt is available in Black or Russet leather.

The 2-Piece Buckle or Spoon & Wreath Buckle is NOT included but available for an additional charge. If the Buckle is purchased with the belt, we will install the buckle at no extra charge.

The belt comes in two different widths:

Click on the picture for additional images.

Proudly MADE in USA.

This hanger is typically used for NCO & Officer Belts, but can be used on enlisted and even modern day belts. This hanger is designed to slide over the existing belt. The hanger is available in black only.

Snap Swivels are available at an extra charge. 2 snap swivels are needed.

Click on the picture for additional images.

Imported.

The J.E.B. Stuart Sword Hanger became a standard cavalry issue throughout the Civil and Indian Wars, up to 1900. Prior to the onset of the Civil War, J.E.B. Stuart did not like the design of the sword hangers used at that time, so he designed and patented his own style of hanger. His device enabled the cavalryman to remove the sword, scabbard, and belt slings entirely without unhooking the scabbard from the belt and leaving the straps swinging loose from the belt rig.

The hanger is available in black or brown.

Snap Swivels are available at an extra charge. 2 snap swivels are needed.

Click on the picture for additional images.

Imported.

Brass. Used for Saber and Sword Belt Hangers. Replica of Original.

Sold individually.

Click on picture for a larger image.

Imported.

The carbine was carried by the trooper suspended from the Carbine Sling worn across his body attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.

Click on the picture for more images.

Available in Black only.

Imported.

Made with high quality American leather, this Carbine Sling is authentically reproduced, may carry an arsenal stamp, and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece. Available in Black Leather.  Arsenal stamps were randomly used on a many products during the 1860s, but not all.

The carbine was carried by the trooper, suspended from the Carbine Sling which worn across his body and attached to the carbine by the snap swivel.

Click on the picture for more images.

Proudly MADE in USA.

The carbine swivel snap is used by cavalry troopers to keep the carbine handy while mounted. The snap swivel goes on the carbine sling. Should a trooper drop his carbine, the carbine remains attached and available due to the carbine sling and carbine swivel snap. This swivel is used with any Civil War or Indian War carbines.

Click on the picture for more images.

Imported.

Specially priced brass hardware for the Cavalry Carbine Sling. Regulation buckle and brass end piece to fit a width of 2-3/8". The end piece needs to have holes drilled for rivet attachment to the leather carbine sling.

The carbine was carried by the trooper, suspended from the Carbine Sling which was worn across his body and attached to the carbine by the snap swivel. This carbine sling is authentically reproduced and is correct for both Civil War and later period cavalry. It features a regulation buckle and brass end piece.

Click on the picture for more images.

Imported.

The Civil War Blakeslee Spencer Quick Loader Cartridge Box is designed for the Spencer Carbine. Because of the rapid speed that a Spencer carbine could be fired, a special box needed to be designed to hold cartridges for loading. Erasmus Blakeslee patented this box late in 1864. U.S. Government contracts for over 30,000 boxes were delivered to the War Department but few were used in the Civil War due to time delays of production and distribution.

This box contains 6 tin tubes encased in a bored wood block. The wood block is wrapped in smooth black bridle leather with a hinged leather lid to protect the open tops of the tin tubes from the elements. The box is worn over the shoulder on the left side. The leather shoulder strap attached to the box holds the device close to the trooper's left side. This arrangement allows the soldier to reach across with his right hand, flip open the 'Quickloader' box lid, draw out a single magazine tube filled with seven cartridges and insert the bullets into the stock of the Spencer weapon. The box has an implement pouch just like the originals, include the shoulder sling, and has a belt loop on the back.

Available for EITHER .44-40 ammunition OR .56-50 ammunition.  The .44-40 will fit .45 Long Colt ammunition. 

The box is available in black leather only and measures approximately 13 inches longs and 2 inches by 3 inches wide.

Click on the picture for additional images.

Imported.

The M1874 Dyer cartridge pouch is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass plate and finial. There are two belt loops on the back. It is lined with lambs wool. The pouch is available in Black or Russet leather. Color selection will be available on the Shopping Cart page.

Chief of Ordnance, General Alexander Dyer, designed the cartridge box needed to carry the ammunition needed by the single action Colt revolvers issued during the late 1800's. The .45 cal cartridges could be easily carried and accessed with this new design.

Click on the picture for additional images.

Imported

The M1876 McKeever Box is used with the 45/70 rifle or carbine during the Indian Wars. It is made of high quality black leather with a US in oval embossed on the flap. The flap closure has a brass finial. There are two belt loops on the back. Inside are 2 rows of ten canvas loops for 20 cartridges. The box opens by folding down on a brass hinge. The box is available in Black or Russet leather.

Click on the picture for additional images.

Imported

The Carbine Boot was designed to hold the barrel of a trooper's carbine snugly while riding on his mount.

This first pattern M1885 carbine boot is made of High Quality American leather. Available in Black leather only.

Click on the picture for more images.

Proudly MADE in USA.

Standard over the shoulder regulation sling for the NCO or Musicians sword.  Comes with US Eagle baldric plate attached. Adjustable length by virtue of holes behind the plate. This sling is the reason for the belt loops behind all regulation US Cartridge Boxes. As an NCO would not be wearing two different slings at the same time, the appropriate setup would be for him to wear the cartridge box on the waist belt while wearing the baldric

Black or White: Add Color selection in Shopping Cart.

Click on the picture for more images.

Imported.

The leather flag carrier has a wide leather strap that goes around the neck. The leather flag holder cup, which falls at about the waist, holds the end of the flag pole. Available in black only.

Click on the the picture for a larger image.

Imported.

This tarred canvas gun sack is about 65" long. It has tarred canvas ties. Fits muskets, including two and three band weapons. Strong and sturdy construction.

Click on the picture for a larger image.

Proudly Made in USA.

This tarred canvas gun sack is about 72" long. It has white linen ties.  Fits all muskets, including two and three band weapons. Strong and sturdy construction.

Click on the picture for more images.

Imported.

This canvas gun sack is about 65" long. It has white canvas ties. Fits muskets, including two and three band weapons. Strong and sturdy construction.

Click on the picture for a larger image.

Proudly Made in USA.

This canvas gun sack. is about 72" long. It has white linen ties. Fits all muskets including all two and three band weapons. Strong and sturdy construction.

Click on the picture for more images.

Imported.

Authentic replica turned wood tampion (or tompion) plug for Enfield or Springfield .58 cal musket.
Click on the image for more pictures.

Proudly Made in USA in the Great State of Idaho.

Authentic replica brass and cork tampion (or tompion) plug for Enfield or Springfield .58 cal musket.
Click on the image for more pictures.

This copper Powder Flask has a spring loaded valve and is approximately 6" tall without the spout. The flask comes with a 15 grain spout for a Colt style .36 cal.  The spout can be removed and the flask will accept other caliber spouts.  

Click on the image for a larger image.

Imported. Made in Italy.

This Musket Nipple Protector and brass tear drop style chain is a nicely detailed replica of the original. The Nipple Protector, also called a Snapcap, is used to protect the musket nipple and hammer from damage during an accidental dry-fire. The square socket fits over the square lug military nipple. The 8 inch brass chain has a brass split ring to secure it to the rifle. This nipple protector fits all the most common musket nipples.

Click on the picture for more images.

Imported.

Standard issue, Authentic Replica. Fits in cap box.

Click on the picture for a larger image.

Proudly Made in USA.

"T" Handle nipple wrench fits most Civil War period reproduction pistols and revolvers and any rifles, such as Kentucky, Hawken, and others that use the smaller #10, #11, and #12 nipples. Fits .36 - .44 cal.

Click on the picture for a larger image.

Proudly Made In USA.

Replacement nipples to fit replica Pietta revolver models. Steel with a small base hole like the factory installed nipples. Use with #10 or #11 size caps. Set of 6 nipples.

Click on the picture for a larger image.

Made in Italy.

Replacement nipples to fit replica Uberti revolver models. Steel with a small base hole like the factory installed nipples. Use with #11 size caps. Set of 6 nipples.

Click on the picture for a larger image.

Made in Italy.

"T" Handle nipple wrench fits all .58 and .69 caliber reproduction weapons (and most originals)  Also fits Sharps, Gallagher, Maynard, etc carbines with musket nipples.

Click on the picture for a larger image.

Proudly Made In USA.

Blue steeled nipple to fit 1842/1861/1862 Enfield or Springfield musket with a nipple tread of 8x1mm. It has a small base hole to be used with musket sized caps.

Click on the picture for a larger image.

Made in Italy.

Musket cleaning kit for .58 cal muskets. The kit contains a bronze brush, a nylon brush, and cotton swab/wiper. 4 steel rods allows for adjustments to fit all barrel lengths. 

At Checkout, add Canvas storage bag for $5.75 (BAGS OUT OF STOCK UNTIL FURTHER NOTICE).

Bags are Made In the USA.

Click on the picture for more images.

Musket cleaning kit bag will hold your .58 cal muskets cleaning kit. The bag is made of Canvas and has a button flap to close and secure your kit. 

Bags are Proudly Made In USA.

BAGS OUT OF STOCK UNTIL FURTHER NOTICE. MAR. 21, 2024

Click on the picture for more images.

Pistol cleaning kit for .36 cal pistols or .44/.45 cal pistols. The kit contains a phosphorus bronze wire brush, a nylon brush, and cotton swab. 2 brass rods allows for adjustments to fit all barrel lengths. Select caliber.

Click on the picture for more images.

Made in Italy.

This Carbine Socket is made of high quality American leather. The Carbine Socket was designed to hold the barrel of a trooper's carbine snugly while riding on his mount. This pattern of Carbine socket continued in service after the Civil War and into the Indian Wars through the early 1880’s until replaced by the Carbine Boots. Available in Black leather only.

Click on the picture for more images.

Proudly MADE in USA.

Issued with each cavalry saddle, the Carbine Socket buckled to the “offside” or right “D” ring of the saddle’s quarter straps. The carbine was carried by the trooper suspended from the sling worn across his body attached to the carbine by the snap swivel. When the trooper was mounted, the barrel of his carbine was fed into the socket attached to his saddle and so arranged, kept the muzzle of his carbine under control, and prevented it from slapping against the side of the horse.

This bugle is correct for the Civil War period. It is used by both CS and US forces. The bugle is made of brass. It is about 11" long.

Click on the picture for a larger image.

Imported.

Rattles had multiple military and non-military uses during the Civil War. Used by watchmen, lighthouse keepers, policemen, firemen they produced NOISE to raise alarm.

Battle Rattles were specified in the 1860 Ordnance Instructions for the United States Navy Article 521 Page 152 RATTLES FOR CALLING BOARDERS.

A thin wooden spring is attached to the heavy wooden body. The spring's free end rests on the ratchet wheel attached to the handle shaft. When rattle is spun the  spring repeatedly snaps against the ratchet wheel producing a VERY LOUD noise. Made from Poplar and Oak woods. 

The rattle body measures approximately 10 3/4" x 3" x 1 1/2". The handle measures about 8 1/2". The rattle is hand rubbed with linseed oil.

Click on the picture for more images.

Proudly MADE IN USA in the Great State of Idaho.

In Stock Low stock.

The .58 caliber musket cartridge box measures 16"L x 11"W x 8"H. Interior dimensions are 14.5"L x 9.75"W x 6.5"H.

Camp Floyd and the Utah War was used as a strategy by both the Northern and Southern states to divert the nation's attention from states rights and slavery issues. 3500 Union troops, about 1/3 of the entire U.S. Army was dispatched to Utah to suppress a rumored rebellion. President James Buchanan believed restoring order to Utah would unite the Democrats and Republicans and the Northerners and Southerners. John Floyd was the Secretary of War . He and other southern Democrats intended to divert Union troops to the West, deplete the U.S. Treasury by millions of dollars by giving out government contract for the move to southern businessmen, and encourage western support for southern stats rights. Camp Floyd was built in 1858 Fairfield, Utah. The army was recalled in 1861 for the Civil War. There was never a rebellion nor war in Utah.

NOTE: Additional shipping charges will be applied due to size and weight of box.

OUT OF STOCK

Proudly MADE IN THE USA in the Great State of Idaho.

The artillery ammunition box measures 19"L x 11"W x 11"H. The interior dimensions are 17.38"L x 9.75"W x 9.25"H. The box is unpainted and is not stenciled.

NOTE: Additional shipping charges will be applied due to size and weight of box.

Back In Stock.  Finally!!

Click on the picture for more images.

Proudly MADE IN THE USA in the Great State of Idaho.

The cartridge box measures 16"L x 11"W x 8"H. The box is unpainted and is not stenciled.

NOTE: Additional shipping charges will be applied due to size and weight of box.

Back In Stock.  Finally!!!

Proudly MADE IN THE USA in the Great State of Idaho.

The cartridge box measures 14.5"L x 5.5"W x 5.25"H. The interior dimensions are 13"L x 3.75"W x 3.5"H. The box is unpainted and is not stenciled. Click on the picture for more images.

NOTE: Additional shipping charges will be applied due to size and weight of box

In Stock.

Proudly MADE IN THE USA in the Great State of Idaho.

This cylinder converts the .36 caliber, 6-shot steel-frame 1851-1861 Navy Revolver to a .38 Long Colt cowboy ammunition. Hollow-based bullets must be used in the conversion. The roll engraving on the black powder cylinder is also available on the conversion cylinder. Select Pietta or Uberti.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Backorders are widespread across the United States. Call for In Stock availablity.

This conversion cylinder may not fit the older Pietta models. Pietta conversion cylinders may require machine fitting; your firearm may be sent to Taylor's & Co. Firearms to have this done for a fee.

One of the most popular conversions, this cylinder converts the .36 caliber, 6-shot steel-frame 1858 Remington Revolver to a .38 Special. Blue finish. Select Uberti or Pietta. This cylinder is manufactured to fit the Remington 1858 steel-frame revolvers.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

This conversion cylinder may not fit the older Pietta models. Pietta conversion cylinders may require machine fitting; your firearm may be sent to Taylor's & Co. Firearms to have this done for a fee.

One of the most popular conversions, this cylinder converts the .44 caliber, 6-shot steel-frame 1858 Remington revolver to a .45 Long Colt. For Pietta models only. Select Blue, Stainless, or Fluted Blue. This cylinder is manufactured to fit the Remington 1858 steel-frame revolvers.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Low Stock. Call to confirm stock before ordering.

This conversion cylinder may not fit the older Pietta models. Pietta conversion cylinders may require machine fitting; your firearm may be sent to Taylor's & Co. Firearms to have this done for a fee.

One of the most popular conversions, this cylinder converts the .44 caliber, 6-shot steel-frame 1858 Remington revolver to a .45 Long Colt. For UBERTI models only. Select Blue, Stainless, Antique, Fluted Blue or Fluted Stainless. This cylinder is manufactured to fit the Remington 1858 steel-frame revolvers.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Backorders are widespread across the United States. Contact us for stock before ordering.

This cylinder converts the .44 caliber, 5-shot steel-frame 1860 Army Revolver to a .45 Long Colt cowboy ammunition. Blue finish. This conversion cylinder is Single Action Shooting Society (SASS)-approved for Cowboy Action Shooting with all five chambers loaded due to the unique safety-notch design.  Select Uberti only available.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

Conversion Cylinders ship separately from firearms purchases.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Pietta Cylinders OUT OF STOCK. Low Stock, contact us before placing order.

This cylinder converts the .44 caliber, 6-shot steel-frame Dragoons to .45 Long Colt cowboy ammunition. Fits Uberti 1st, 2nd, and 3rd Model Dragoons. Blue finish.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Out of Stock.

This cylinder converts the .44 caliber, 6-shot steel-frame Euroarms of America Rogers & Spencer  revolver to a .45 Long Colt cowboy ammunition. Blue finish.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

This cylinder converts the .44 caliber, 6-shot steel-frame Ruger Old Army revolver to a .45 Long Colt cowboy ammunition. For RUGER models only. Select Blue, Stainless, or Fluted Blue or Fluted Stainless.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

LOW Stock: Blued and Stainless.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

This cylinder converts the .44 caliber, 6-shot steel-frame Walker revolver to a .45 Long Colt cowboy ammunition. Blue finish.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Backorders are widespread across the United States. Contact us for stock before ordering.

Authentic replica turned wood tampion (or tompion) plug for Enfield or Springfield .69 cal musket.
Click on the image for more pictures.

Proudly Made in USA in the Great State of Idaho.