This 20-gauge Howdah Hunter Percussion pistol shotgun made by Pedersoli features a blue barrel and stock high on the muzzle. The sturdy grip with fine checkering on the sides provides for a robust grip and is completed with a metal butt plate. The ramrod has a horn tip at the one end. The gun is equipped with a double set trigger. The frame is case hardened. The lock is engraved with "MANUF RE" over "a Versailles".

Click on the picture to enlarge.

Adult (over 21) Signature is Required for delivery.

In Stock, Low Stock. Contact us to confirm stock before ordering.

Made by Pedersoli.

With a 9" round barrel and weighing over four pounds, the Colt Walker was a weapon for the toughest soldiers and frontier lawmen. Prior to the introduction of the .357 Magnum in 1935, no other revolver as more powerful. Inspired by Capt. Samuel H. Walker of the US Mounted Rifles, it fired .44 caliber balls. 

This revolver features a blue finish and case hardened frame.

Click on the picture to enlarge.

Made by Uberti.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK.

The Colt Dragoon, developed in 1848, was issued in pairs as service firearms to the US Mounted Rifles 1st Cavalry. These units came to be known as "Dragoons". About 7,000 of the 1st Model Dragoon Revolver were made.

This revolver features  a blue finish with case hardened frame, and a brass backstrap and trigger guard. The trigger guard is square and the barrel is 7 1/2" long.

Click on the picture to enlarge.

Made by Uberti.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The Colt Dragoon, developed in 1848, was issued in pairs as service firearms to the US Mounted Rifles 1st Cavalry. These units came to be known as "Dragoons". About 2,700 of the 2nd Model Dragoon Revolver were made.

This revolver features  a blue finish with case hardened frame, and a brass backstrap and trigger guard. The trigger guard is square and the barrel is 7 1/2" long.

Click on the picture to enlarge.

Made by Uberti.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The Colt Dragoon, developed in 1848, was issued in pairs as service firearms to the US Mounted Rifles 1st Cavalry. These units came to be known as "Dragoons". About 10,500 of the 3rd Model Dragoon Revolver were made.

This revolver features  a blue finish with case hardened frame, and a brass backstrap and trigger guard. The trigger guard is round and the barrel is 7 1/2" long.

Click on the picture to enlarge.

Made by Uberti.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK. 

The first Dragoon was made by Colt for Eli Whitney. The Whitneyville model is manufactured like a Walker, but uses the Dragoon barrel and cylinder. This revolver features a Walker style grip, square brass trigger guard, steel backstrap, and oval notches on the cylinder. Blue finish with case hardened frame and Blade front sights. The barrel is 7 1/2" long. Overall length is 13.4" and weight is 4.1 pounds.

Click on the picture to enlarge.

Made by Uberti.

Adult (over 21) Signature is Required for delivery.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The 6-shot revolver has perfect balance, precise aim, and dependability. 

The .36 Cal 1851 Navy features a brass backstrap and trigger guard. The barrel is 7 1/2".

Click on the image to enlarge.

Manufactured by Pietta.

In Stock, Low Stock.  Contact us to confirm stock before ordering.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The 6-shot revolver has perfect balance, precise aim, and dependability. 

The .44 cal 1851 Navy features a brass backstrap and trigger guard. The barrel is 7 3/8 ".

Click on the image to enlarge.

Manufactured by Pietta.

In Stock, Low Stock.  Contact us to confirm stock before ordering.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The 6-shot revolver has perfect balance, precise aim, and dependability. 

The .36 cal 1851 Navy features a brass backstrap and trigger guard. The barrel is 7 1/2".

Click on the picture to enlarge.

Manufactured by Uberti.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era.

The .36 caliber, 6-shot 1851 Navy revolver features a Brass backstrap and trigger guard. The barrel is 5".

Click on the picture to enlarge the image.

Made by Uberti.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The .36 caliber, 6-shot revolver has perfect balance, precise aim, and dependability. 

The 1851 Navy London features a steel backstrap and trigger guard with a 7 1/2" barrel.

Click on the image to enlarge.

Made by Uberti.

In Stock, Low Stock.  Contact us to Confirm stock before orderding.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era.

The .44 caliber, 6-shot 1851 Navy Sheriff revolver features a Brass backstrap and trigger guard. The barrel is 4.78".

Click on the image to enlarge.

Made by Pietta.

In Stock, Low Stock. Contact us to Confirm Stock before ordering.

The 1851 Navy Steel, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1851 is a six-shot, .36 caliber revolver with a blue finish, Brass backstrap, and forged frame. The barrel is 5" and the trigger guard is brass.  This 1851 navy model features a case hardened steel frame, blued parts, brass backstrap and triggerguard, octagonal barrel, and an walnut Navy size grip. 

Click on the image to enlarge.

Made by Pietta.

OUT OF STOCK

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The 6-shot revolver has perfect balance, precise aim, and dependability. 

The .36 cal 1851 Navy features a brass backstrap and trigger guard. The barrel is 7 1/2".

Click on the image to enlarge.

Made by Pietta.

In Stock. Call us to confirm stock before ordering.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The 6-shot revolver has perfect balance, precise aim, and dependability. 

The .44 cal 1851 Navy features a brass backstrap and trigger guard. The barrel is 7.5.

Click on the image to enlarge.

Made by Pietta

In Stock, Low Stock. Call us to confirm stock before ordering.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The .44 caliber, 6-shot revolver has perfect balance, precise aim, and dependability. 

The 1851 Navy features a brass backstrap and trigger guard. The blue barrel is 7 1/2".

Click on the image to enlarge.

Made by Pietta.

In Stock. Contact us to Confirm stock before ordering.

This .31 caliber 5-shot revolver features a blue finish and brass backstrap and trigger. The barrel is 4" long.

Click on the picture to enlarge.

Made by Uberti.

OUT OF STOCK.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 New Army is a six-shot, .44 caliber revolver with a case-hardened finish, steel backstrap. The barrel is 8" and the trigger guard is brass. A 5 1/2" barrel is available.

Click on the image to enlarge.

Made by Uberti.

Out of stock order will go on back order.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 New Army is a six-shot, .44 caliber revolver with an Antique finish, steel backstrap. The barrel is 8" and the trigger guard is brass. 

Click on the image to enlarge.

Made by Uberti.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington New Army is a six-shot, .44 caliber revolver with a blue finish, brass backstrap, and forged frame. The barrel is 5 1/2" and the trigger guard is brass

Click on the image to enlarge.

Made by Uberti.

Out Of Stock.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington New Army is a six-shot, .44 caliber revolver with a case hardened forged frame and  steel backstrap. The barrel is 5 1/2" and the trigger guard is brass. 2-piece walnut grips and dovetail front blade sights. Overall length is 11.1" and weight is 2.5 pounds.

Click on the image to enlarge.

Made by Uberti.

In stock, Low Stock. Contact us to confirm stock.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington New Army is a six-shot, .44 caliber revolver with a blue finish, steel backstrap, and forged frame. The barrel is 8" and the trigger guard is brass. 

Click on the image to enlarge.

Made by Uberti.

OUT OF STOCK.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington New Army is a six-shot, .44 caliber revolver with a blue finish, steel backstrap, and forged frame. The barrel is 8" and the trigger guard is brass. The grip is 2 piece walnut. Dovetail front blade sights. Overall length 13.6 inches. Weight 2.7 pounds.

Black Rock Finish is applied which makes this Remington resistant to corrosion form black powder and very easy to clean.

Click on the image to enlarge.

Made by Uberti.

OUT OF STOCK.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington New Navy is a six-shot, .36 caliber revolver with a forged frame, blue finish, brass triggerguard and has a 7 3/8" barrel. 

Click on the image to enlarge.

Manufactured by Uberti.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington is a six-shot, .44 caliber revolver with a steel frame, brass trigger guard and blue 5.1/2" barrel.

Click on the image to enlarge.  

Made by Pietta.

Out Of Stock.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington is a six-shot, .44 caliber revolver with a steel frame, brass trigger guard and blue 8" barrel.

Click on the image to enlarge.

Made by Pietta.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington New Navy is a six-shot, .36 caliber revolver with a forged frame, steel backstrap, blue finish, brass trigger guard and has a 6 1/2" barrel.

Click on the image to enlarge.

Manufactured by Pietta.

In Stock, Low Stock. Contact us to confirm stock before ordering. 

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington is a six-shot, .44 caliber revolver with a brass frame and trigger guard and blue 8" barrel.

Click on the image to enlarge.

Made by Pietta.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington is a six-shot, .44 caliber revolver with an "Old SIlver" steel frame, brass trigger guard and blue 8" barrel.

Click on the image to enlarge.

Made by Pietta.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington, stainless steel, is a six-shot, .44 caliber revolver with a stainless steel barrel and backstrap. The barrel is 8" and the trigger guard is brass.

Click on the image for more images.

Made by UBERTI.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington, stainless steel, is a six-shot, .44 caliber revolver with a stainless steel barrel and backstrap. The barrel is 8" and the trigger guard is brass.This gun features Target Sights.

Click on the image for more images.

Made by Uberti.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1858 Remington, a solid-frame design that was both elegant and reliable, was the prevailing choice of the military officers in the Civil War.

The 1858 Remington, stainless steel, is a six-shot, .44 caliber revolver with a stainless steel barrel and backstrap. The barrel is 5 1/2" and the trigger guard is brass. 

Click on the image for more images.

Made by Uberti.

Contact us for stock before ordering.

The 1858 Remington, a solid-frame design that was both elegant and reliable.  The Ace model puts a modern spin on the much-loved 1858 Remington model with a snub nose barrel. Since this model has the shortened barrel length it features a "lever-latch" part to retain the cylinder pin in the frame and **does not come with a loading lever. It also features a steel frame, brass triggerguard, octagonal barrel, fixed front blade sight

The 1858 Remington New Navy is a six-shot, .44 caliber revolver with a forged frame, steel backstrap, blue finish, brass trigger guard and has a 3" barrel.

Click on the image to enlarge.

Manufactured by Pietta.

In Stock, Low Stock. Contact us to confirm stock before ordering. 

Considered the most awesome hand-held firing weapon ever produces, the.44 caliber 9-shot with a .20 gauge single shot barrel was a favorite among Confederate Cavalry officers.

This revolver features a polished blue finish and case hardened hammer and trigger, checkered, oil-finished walnut grips, lanyard ring,and trigger guard with spur. The barrel is 6 3/4" long.

Click on the picture to enlarge.

Made by Pietta.

OUT OF STOCK UNTIL ALL BACKORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1860 Army was adopted as US government ordnance because of its lighter weight, improved balance, and superior ballistics. This 6 shot, .44 caliber round, 8" long barrel percussion revolver became very popular with mounted troops and went on to be the issued sidearm for the US Army for many years. 

This revolver features a steel backstrap and brass trigger guard.

Click on the picture to enlarge.

Made by Pietta.

OUT OF STOCK.

The 1860 Army was adopted as US government ordnance because of its lighter weight, improved balance, and superior ballistics. This 6 shot, .44 caliber round, 8" long barrel percussion revolver became very popular with mounted troops and went on to be the issued sidearm for the US Army for many years. 

This revolver features a steel backstrap and brass trigger guard.

Click on the picture to enlarge.

Made by Uberti.

OUT OF STOCK.

The 1860 Army was adopted as US government ordnance because of its lighter weight, improved balance, and superior ballistics. This 6 shot, .44 caliber round, 8" long barrel percussion revolver became very popular with mounted troops and went on to be the issued sidearm for the US Army for many years. 

This revolver features charcoal blue finish, steel backstrap and brass trigger guard.

Click on the picture to enlarge.

Made by Uberti.

IN Stock. Contact us to confirm stock before ordering.

The 1860 Army was adopted as US government ordnance because of its lighter weight, improved balance, and superior ballistics. This 6 shot, .44 caliber round, 8" long barrel percussion revolver became very popular with mounted troops and went on to be the issued sidearm for the US Army for many years. 

This revolver features a brass backstrap and brass trigger guard. Blue finish with case hardened frame. Blade front sights. Overall length is 13.8" and weight is 2.6 pounds.

Click on the picture to enlarge.

Made by Uberti.

OUT OF STOCK UNTIL ALL BACK ORDERS HAVE BEEN FULFILLED; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1860 Army was adopted as US government ordnance because of its lighter weight, improved balance, and superior ballistics. This 6 shot, .44 caliber round, 5 1/2" long barrel percussion revolver became very popular with mounted troops and went on to be the issued sidearm for the US Army for many years. 

This revolver features a steel backstrap and brass trigger guard.

Click on the picture to enlarge.

Made by Pietta.

The .36 Cal may be in stock call us to confirm stock on the .36 Cal model.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The .36 caliber, 6-shot revolver has perfect balance, precise aim, and dependability. 

This 1861 Navy revolver has a 7 1/2" barrel and features a steel backstrap and trigger guard.

Click on the image to enlarge.

Manufactured by Pietta.

In Stock, Low Stock. Contact us to confirm stock before ordering.

The 1851 Navy, produced from 1851-1872 was the most famous of the cap-and-ball era. The .36 caliber, 6-shot revolver has perfect balance, precise aim, and dependability. 

This 1861 Navy revolver has a 7 1/2" barrel and features a steel backstrap and trigger guard.

Click on the image to enlarge.

Manufactured by Uberti.

Out of Stock.

Built stronger and with a larger caliber, this pocket sized revolver was an advancement over the earlier models.

This .36 caliber, 5-shot revolver features a blue finish with brass backstrap and trigger guard. The gun features a 5 1/2"  long barrel.

Click on the picture to enlarge.

Made by Uberti.

Out of Stock.  Please Contact us for Stock Questions.

Built stronger and with a larger caliber, this pocket sized revolver was an advancement over the earlier models.

This .36 caliber, 5-shot revolver features a blue finish with brass backstrap and trigger guard. It features a 6 1/2" long barrel.

Click on the picture to enlarge.

Made by Uberti.

In Stock, Low Stock. Contact us to Confirm stock before ordering.

Built stronger and with a larger caliber, this pocket sized revolver was an advancement over the earlier models.

This .36 caliber, 5-shot revolver features a blue finish with brass trigger guard. The barrel is 6 1/2" long.

Click on the picture to enlarge.

Made by Uberti.

Low Stock DEC. 29, 2023. Contact us to confirm stock before ordering.

The 1863 Pocket Remington, made by Pietta, is a pistol designed to fit in a coat pocket or other small space.

This .31 caliber, 5-shot revolver features a blue barrel with brass frame and backstrap  and spur trigger. The barrel is 3 1/2".

Click on the picture to enlarge.

Made by Pietta.

In Stock, Low Stock. Contact us to confirm stock before ordering.

 The 1863 Pocket Remington, made by Pietta, is a pistol designed to fit in a coat pocket or other small space.

This .31 caliber, 5-shot revolver features a nickel plated brass frame, steel barrel, spur trigger, and nickel plated backstrap. The barrel is 3 1/2".

Click on the picture to enlarge. 

In Stock, Low Stock. Contact us to confirm stock before ordering.

Made by Pietta.

The 1863 Pocket Remington, made by Pietta, is a pistol designed to fit in a coat pocket or other small space.

This .31 caliber, 5-shot revolver features a blue finish and a case hardened hammer, a steel frame, barrel, and backstrap. Spur trigger. The barrel is 3 1/2".

Click on the picture to enlarge.

Made by Pietta.

OUT OF STOCK; ORDERS MAY CONTINUE TO BE PLACED AND WILL AUTOMATICALLY BE PLACED ON BACKORDER

The 1873 Cattleman Black Powder model is produced with specs like the popular Peacemaker models in cartridge calibers. 

This revolver features American Walnut grips, a balance 5 1/2" barrel and the weight and feel of a cartridge model. (The picture shows a 7 1/2" barrel which is no longer available.)

Click on the picture to enlarge.

Made by Uberti.

OUT OF STOCK.

This copper Powder Flask has a spring loaded valve and is approximately 6" tall without the spout. The flask comes with a 15 grain spout for a Colt style .36 cal.  The spout can be removed and the flask will accept other caliber spouts.  

Click on the image for a larger image.

Imported. Made in Italy.

Standard issue, Authentic Replica. Fits in cap box.

Click on the picture for a larger image.

Proudly Made in USA.

"T" Handle nipple wrench fits most Civil War period reproduction pistols and revolvers and any rifles, such as Kentucky, Hawken, and others that use the smaller #10, #11, and #12 nipples. Fits .36 - .44 cal.

Click on the picture for a larger image.

Proudly Made In USA.

Replacement nipples to fit replica Pietta revolver models. Steel with a small base hole like the factory installed nipples. Use with #10 or #11 size caps. Set of 6 nipples.

Click on the picture for a larger image.

Made in Italy.

Replacement nipples to fit replica Uberti revolver models. Steel with a small base hole like the factory installed nipples. Use with #11 size caps. Set of 6 nipples.

Click on the picture for a larger image.

Made in Italy.

Pistol cleaning kit for .36 cal pistols or .44/.45 cal pistols. The kit contains a phosphorus bronze wire brush, a nylon brush, and cotton swab. 2 brass rods allows for adjustments to fit all barrel lengths. Select caliber.

Click on the picture for more images.

Made in Italy.

This cylinder converts the .36 caliber, 6-shot steel-frame 1851-1861 Navy Revolver to a .38 Long Colt cowboy ammunition. Hollow-based bullets must be used in the conversion. The roll engraving on the black powder cylinder is also available on the conversion cylinder. Select Pietta or Uberti.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Backorders are widespread across the United States. Call for In Stock availablity.

This conversion cylinder may not fit the older Pietta models. Please contact Pietta directly to verify before pruchase.

This cylinder is used on the .44 caliber, 6-shot steel-frame 1851-1861 Pietta. Cylinder . 44 Plain Blued (Includes Cylinder, Safety Pins, And Nipples)

Click on the picture for more images. More photos coming soon.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

One of the most popular conversions, this cylinder converts the .36 caliber, 6-shot steel-frame 1858 Remington Revolver to a .38 Special. Blue finish. Select Uberti or Pietta. This cylinder is manufactured to fit the Remington 1858 steel-frame revolvers.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

One of the most popular conversions, this cylinder converts the .44 caliber, 6-shot steel-frame 1858 Remington revolver to a .45 Long Colt. For Pietta models only. Select Blue, Stainless, or Fluted Blue. This cylinder is manufactured to fit the Remington 1858 steel-frame revolvers.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Low Stock. Call to confirm stock before ordering.

This conversion cylinder may not fit the older Pietta models. Please contact Pietta directly to verify before pruchase. 

More photos coming soon.

This cylinder is used on the .44 caliber, 6-shot steel-frame 1858 Pietta. Cylinder . 44 Plain Blued (Includes Cylinder, Safety Pins, And Nipples)

PLEASE NOTE THIS IS NOT A CONVERSION CYLINDER.

Click on the picture for more images.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

One of the most popular conversions, this cylinder converts the .44 caliber, 6-shot steel-frame 1858 Remington revolver to a .45 Long Colt. For UBERTI models only. Select Blue, Stainless, Antique, Fluted Blue or Fluted Stainless. This cylinder is manufactured to fit the Remington 1858 steel-frame revolvers.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Backorders are widespread across the United States. Contact us for stock before ordering.

This cylinder converts the .44 caliber, 5-shot steel-frame 1860 Army Revolver to a .45 Long Colt cowboy ammunition. Blue finish. This conversion cylinder is Single Action Shooting Society (SASS)-approved for Cowboy Action Shooting with all five chambers loaded due to the unique safety-notch design.  Select Uberti only available.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

Conversion Cylinders ship separately from firearms purchases.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Pietta Cylinders OUT OF STOCK. Low Stock, contact us before placing order.

This cylinder converts the .44 caliber, 6-shot steel-frame Dragoons to .45 Long Colt cowboy ammunition. Fits Uberti 1st, 2nd, and 3rd Model Dragoons. Blue finish.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Out of Stock.

This cylinder converts the .44 caliber, 6-shot steel-frame Euroarms of America Rogers & Spencer  revolver to a .45 Long Colt cowboy ammunition. Blue finish.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

This cylinder converts the .44 caliber, 6-shot steel-frame Ruger Old Army revolver to a .45 Long Colt cowboy ammunition. For RUGER models only. Select Blue, Stainless, or Fluted Blue or Fluted Stainless.

Click on the picture for more images.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

LOW Stock: Blued and Stainless.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

This cylinder converts the .44 caliber, 6-shot steel-frame Walker revolver to a .45 Long Colt cowboy ammunition. Blue finish.

Click on the picture to enlarge.

THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY.

A cylinder change converts cap and ball revolvers from percussion to cartridge. Now you can switch back and forth from black powder to centerfire by changing the cylinder. The cylinder and plate fit together without screws or threads, so conversion is simple: pull the cylinder pin, drop the cylinder, and lift off the plate with your fingers.

Only certified 4150 arsenal-grade steel is used in the production of these cylinders and top-plates to provide superior quality & strength and ensure safety & durability. No frame modification is needed, although minor fitting may be required due to gun manufacturer variations.

FIREARMS & CYLINDERS CANNOT BE RETURNED OR EXCHANGED.

Backorders are widespread across the United States. Contact us for stock before ordering.

Replica Revolver Cartridge box Navy Pistol.  

Richmond Arsenal label is a stamped copy on parchment to replicate the original look of the label. 

Working replica of the original Civil War time cartridge box for combustible envelope cartridges 36 cal. percussion revolvers.  Match box style lets you use it to store your cartridges.  Pine-wood case for holding 6 paper cartridges prepared for your percussion revolver. The box is durable and absolutely reusable. Will serve you for a long time if you keep it dry. Holds 6 paper cartridges for your selected caliber. A design very close to the original wrapped cartridge. An excellent companion for any re-enactor or target shooter.

Please note that the dummy cartridges are just illustrations, not part of the offer.

Click on the image for more pictures.

Proudly Made in the USA.